Maximise Your Resources – Part 3

Posted by vernonsimpson on March 24, 2013

In the last post we talked about three more ways you can work on maximising your current resources. They included:

  • Reveal your business’ soul
  • From breaking even to breaking the bank
  • Stand up and stand out

Today we’ll talk about the last three areas you can work on to maximise your current resources. They are:

  • An offer they can’t refuse
  • Would you like fries with that?
  • Stay away from the edge of the cliff

An Offer They Can’t Refuse

The secret to success is to stay ahead of your competitors- maintain the competitive edge. To do that you need make it easier for your customers/clients to say “yes” rather than “no”. You do this by eliminating all the psychological, financial, physical, emotional and other road blocks they may have.

You can take the risks for them by offering warranties and guarantees that make the customer feel more confident in you, your business and your products/services. You also must be serious about your offer and follow through if a situation does arise. The quickest way to the bottom is to play games or take back a warranty or guarantee.

Would You Like Fries With That?

It’s the oldest trick in the book. I mean, really, how many times a week do you fall for it? Every time you sell a product or service, you need to offer an add-on, upgrade or back-end product to go with it. These products must be complimentary to the original product being purchased and must create a higher perceived value.

Avoid the Edge of the Cliff

Continuing to test and measure your systems, products, marketing methods and all other aspects of your business allow you to see problems before they happen and therefore avoid falling off the edge of the cliff.

Here are a few specific areas you can test for potential improvements:

  • Marketing
  • Sales Copy
  • Customer Service
  • Sales Letters
  • Sales Presentations
  • Employee-Customer Interaction

Through testing these different areas you will find products/services where you can raise the price, maybe others where you can lower the price or offer that product as an incentive item, and find many others areas for improvement that will better utilise your current resources.

This wraps up our series on how to maximise on your current resources. If you need help working through any of these or the previous areas, try our FREE test drive to work with one of our amazing business coaches.

Until the next time

Vernon Simpson, Nydes Business Coach

Coaching Business Owners and Executives to their next level of Excellence

349,476 Responses to “Maximise Your Resources – Part 3”

  1. ??????????? said...

    This is my first time go to see at here and
    i am genuinely happy to read all at one place.

    Feel free to visit my page … ???????????

  2. Jdra.Lesieur.name said...

    We are a group of volunteers and starting a new scheme in our community.
    Your web site offered us with valuable information to work on. You have done an impressive task and our entire group can be
    grateful to you.

    Look at my website; Jdra.Lesieur.name

  3. ottawa male escorts said...

    Asking questions are actually nice thing if you are not understanding something completely, however this piece of writing offers fastidious
    understanding yet.

  4. Gears said...

    Gears are fundamental mechanical components that have been pivotal in the advancement of technology and machinery.

    From simple watches to complex industrial machines, gears play a critical
    role in the transmission of power and motion. This article delves into the
    history, types, functions, and applications of gears, shedding light
    on their indispensable role in modern engineering.

  5. Prodvijenie saitov v Moskve_kaEr said...

    seo ??????????? ????????????? ?????? ? ?????? [url=prodvizhenie-sajtov-v-moskve119.ru]seo ??????????? ????????????? ?????? ? ??????[/url] .

  6. macauslot88 said...

    This article provides clear idea for the new viewers of blogging,
    that genuinely how to do blogging and site-building.

  7. ?? ????? said...

    the mental health of the frontline workers and volunteers who respond to it.?? ??I didn’t know that there was such a thing as a helpline like this one.

  8. Charlesbak said...

    ???? ???? — ???????????? ??? ?? ?????? ????? ? ????????? ???????????? ????????? ??????? ????? ???????? ??? ?????? ???? https://kuhnyaofabrikaufabrik.ru/. variant3

  9. escort milton keynes said...

    Can you tell us more about this? I’d like to find out
    more details.

  10. Bannersystem.Zetasystem.dk said...

    Hi there, I enjoy reading through your post. I like to write a little comment to support you.

    Here is my page; Bannersystem.Zetasystem.dk

  11. Prodvijenie saitov v Moskve_xlEr said...

    seo ??????????? ?????? ? ?????? seo ??????????? ?????? ? ?????? .

  12. ????? ?? said...

    ????? ??my prediction is accurate.The real question at hand is why animal emotions have evolved,

  13. Where to Buy Prodentim said...

    Valuable info. Lucky me I discovered your website by accident,
    and I am surprised why this coincidence did not took
    place in advance! I bookmarked it.

  14. Prodvijenie saitov v Moskve_snEr said...

    ??????????? ?????? ? ?????? ???? ??????????? ?????? ? ?????? ???? .

  15. Bungalow für 6 Personen Feldberg said...

    Ich habe heute mehr als 4 Stunden online verbracht, aber ich habe noch nie einen so
    interessanten Artikel wie Ihren gefunden. Es ist wirklich lohnenswert genug für mich.

    Aus meiner Sicht, wenn alle Webbesitzer und Blogger so gute Inhalte erstellen würden wie Sie, wäre
    das Netz viel nützlicher als je zuvor.

  16. lottery defeated software said...

    Hi! This is kind of off topic but I need some
    help from an established blog. Is it very hard to set up your own blog?
    I’m not very techincal but I can figure things out pretty fast.
    I’m thinking about setting up my own but I’m not sure where to begin. Do you have any ideas or suggestions?

    Thanks

    Look into my website … lottery defeated software

  17. best online crypto mining said...

    I loved as much as you will receive carried out right here.
    The sketch is attractive, your authored subject matter stylish.
    nonetheless, you command get got an edginess over that you wish be delivering the following.
    unwell unquestionably come more formerly again as exactly the same nearly a lot often inside
    case you shield this hike.

  18. Quantum Machines said...

    Hello friends, its fantastic article regarding tutoringand fully explained, keep it up all the time.

  19. ZA88 ????? said...

    Greetings! Very helpful advice within this post! It is the little changes that make the largest changes.
    Many thanks for sharing!

  20. ???? said...

    Wow, this paragraph is pleasant, my younger sister is analyzing these
    things, so I am going to convey her.

  21. vulkan platinum ??????? said...

    ??? ????????? ????? ?????? ???????????????
    ?????? ?? ??????????? ?????
    ????? ? ??????????? ????? ??????????, vulkan platinum ???????.

  22. UchezTomma said...

    ????? ??????????? ? ???????????? ???????????????? ???????-???????? ?? ?????????? ??? ????? ???????? ???????????! ?????? ??????????? ? ????????? ??????? ????????????. ???????? ????? ???????? ??????? ?????????? ????? ? ????????? ????????????? ?? ???????????. ?????? ?????????? ????????? ??? ?????. ????? ast zoom ???????? Audioliga.ru – ????, ??? ????? ????? ?????? ?????????? ??? ?????? ???????. ?????????? ? ????? ????????? ????????????? ?? ?????? ????????. ??????????? ????????, ??? ????????, ?????????? ? ???????? ??????????? ???????!

  23. lottery defeater software said...

    Fine way of describing, and fastidious post to take data
    on the topic of my presentation focus, which i am going to present in college.

    Here is my homepage lottery defeater software

  24. RodneyGearl said...

    Stumbled upon interesting material – I can’t help but recommend you to read https://connerxnwi954.hpage.com/post1.html

  25. Mami188 said...

    Hi there very cool web site!! Guy .. Beautiful ..
    Superb .. I will bookmark your blog and take the feeds also?
    I’m happy to seek out numerous useful info here in the post, we want work out more strategies in this regard, thanks for sharing.
    . . . . .

  26. vidude.com New Zealand's Premier Video Ads for Small to Medium Businesses said...

    Hi every one, here every one is sharing these knowledge, thus it’s pleasant to read this
    website, and I used to visit this webpage all the time.

  27. ???????????4KING ????? said...

    Hurrah, that’s what I was searching for, what a material!
    existing here at this weblog, thanks admin of this web page.

  28. VictorGigue said...

    Pret personnel mauvais credit 365 – Pret personnel mauvais credit 365 – [url=http://pret-personnel-mauvais-credit-365.wikidot.com]http://pret-personnel-mauvais-credit-365.wikidot.com[/url]

  29. MACAUSLOT88 Deposit Pulsa Indosat said...

    I’m not that much of a online reader to be honest but your sites really nice, keep
    it up! I’ll go ahead and bookmark your website to come back down the road.
    Cheers

  30. veterans disability law firm said...

    10 Tips To Build Your Veterans Disability Lawsuit Empire
    veterans disability law firm

  31. Charlesbak said...

    ???? ???? — ???????????? ??? ?? ?????? ????? ? ????????? ???????????? ????????? ??????? ????? ???????? ??? ?????? ???? https://kuhnyaofabrikaufabrik.ru/. variant5

  32. tonic greens said...

    I know this web site provides quality based posts and extra material, is there any other web page which presents such
    data in quality?

    Here is my webpage: tonic greens

  33. Georgewhata said...

    Came across an interesting article, worth a glance https://www.demilked.com/author/zerianrmzu/

  34. CNC Turning said...

    Computer Numerical Control (CNC) turning is a manufacturing
    process that has significantly transformed the production landscape.
    It leverages advanced computer technology to automate and control machine tools, enhancing precision, efficiency, and
    consistency in manufacturing. This article delves into
    the intricacies of CNC turning, its benefits, applications, and
    future prospects.

  35. JesseTET said...

    ??? ?????? ??????? ????????, ??? ?????????? ?????????? ? ?????????????????? ????????? ??? ?? ?????? ???????? ? ??? ?? ??????????? ???? ???????
    ??? ?? ?? ????????????? ?????? ?? ??? ??????????? ? ??????? ??? ???????? ????? ??? ? ??????? ???? ????? ????? ?????????????? ??? ??????
    ??? ??????? ????? ????? ????????? ????? @pokras7777 ???? ????????? ? ???? ?????? ? ????????? https://t.me/bazixrumer ???? ????? ????? ????? pokras7777
    ?? ????? ???? ??? ?????? ? ????? ???????? ?? ?????????????????? ?? ????? ??????? ????? ?????? 24/7 ??? ????????!

  36. Miranda said...

    Well expressed certainly. .

    Feel free to surf to my website – https://Agf-Wiki.dk/index.php/Entreprise_Web_%C3%83%E2%82%AC_Montr%C3%83_al_Design_Publicit%C3%83_Seo

  37. gangbang indo said...

    I think this is one of the most vital information for me.
    And i am glad reading your article. But want to remark on few general
    things, The website style is ideal, the articles
    is really excellent : D. Good job, cheers

  38. santekhnik_dgen said...

    ?????????????? ??????: ????????? ??????? ? ??????? ?????????? ?????? ?????????? ???? http://santehnik-spb-cena.ru/ .

  39. Charlesbak said...

    ???? ???? — ???????????? ??? ?? ?????? ????? ? ????????? ???????????? ????????? ??????? ????? ???????? ??? ?????? ???? https://kuhnyaofabrikaufabrik.ru/. variant1

  40. ngentot pembantu said...

    Hello, after reading this awesome paragraph i am too
    delighted to share my experience here with colleagues.

  41. MACAUSLOT88 Deposit Pulsa 3MACAUSLOT88 Deposit Pulsa 3 said...

    Hi there I am so excited I found your website,
    I really found you by mistake, while I was browsing on Google for something else, Anyhow I am here now and would just like to say thank you for a fantastic post and a all round enjoyable blog (I also love the
    theme/design), I don’t have time to browse it all at the moment but I have book-marked it and also included your RSS feeds, so when I have time
    I will be back to read more, Please do keep up the fantastic jo.

  42. gold dust price per kg said...

    Incredible loads of amazing material.

  43. how to make pipe bomb said...

    I got this web site from my buddy who shared with me about this website and at the moment this time
    I am visiting this site and reading very informative
    articles at this time.

Add a Comment